1000mm x 1000mm x 17mm – Tension Fabric – Wall Frame
We offer a design service for your artwork, whether that be for the Revolution Pop-Up stands or Exhibition Kits, or one of our Tension Fabric Frames or Lightboxes.
We’re more than happy to quote you for this service, based on a competitive hourly rate of £75 per hour, excluding image purchasing rights if required.
We offer a design service for your artwork, whether that be for the Revolution Pop-Up stands or Exhibition Kits, or one of our Tension Fabric Frames or Lightboxes.
We’re more than happy to quote you for this service, based on a competitive hourly rate of £75 per hour, excluding image purchasing rights if required.
Delivery Methods
Delivery Periods
1000mm x 1000mm x 17mm – Tension Fabric – Wall Frame
£87.00 – £95.00
A slim 17mm deep frame profile, designed to be screwed against a wall. The profile takes a fabric graphic stitched with a PVC edge strip, allowing the graphic to be quickly and easily changed.
Description
An economical anodised aluminium frame, 17mm deep that is designed to be screwed to a wall that will take a quick-change tension fabric graphic or fabric graphic. Available in a range of standard sizes or made to order in bespoke sizes, the strength of this frame will support fabric graphics up to 5m high by any width. This particular frame is 1000mm x 1000mm x 17mm.
These frames work best with graphics printed by dye sublimation onto display polyester or block out polyester fabrics. Frames can be produced to any size up to 5m high x any length. The corners and joints of the frame are connected using simple ‘L’ shaped metal plate joints – requiring the use of Allen keys.
We recommend a person competent in DIY installs these frames – screwing it to the wall every 500mm. 2 people may be required to make installation easier.
Please note: frames do not come pre-drilled. This can be done upon request, however.
Specification
| Width |
1000mm
|
| Height |
1000mm
|
| Depth |
17mm
|
| Weight |
9kg
|
| Construction |
Wall Frame
|
| Framework |
Silver Anodised Aluminium
|
| Assembly |
10 minutes
|
| Graphics |
Graphics are produced using dye sublimation printing onto polyester fabrics, giving deep rich colours and impressive detail. Choose from a simple Display Polyester, or a premium Blockout fabric.
|
| Fireproof |
Yes, all our fabrics are fire retardant making them suitable for use all over the world and in airports. Fire certificates are available upon request.
|
| Warranty |
Preview Display’s Tension Fabric Framework is guaranteed for 10 years against manufacturing defects.
|
| Packaging |
Products are delivered split and flat-packed into an outer cardboard box/tube depending on frame profile and wrapped in protective foam and bubble wrap, to make shipping more convenient and safer for your Tension Fabric frame.
|
| Environmental |
Our Tension Fabric Frames are made from lightweight aluminium and as such can be easily recycled. Our fabrics are polyester which can also be recycled. The inks we use are water-based dye sublimation inks that contain no VOC’s.
|
Supplying Artwork
Artwork should be produced using the artwork template and in accordance with the artwork guide, which is available as a download below.
Our Artwork template has been designed to be used in Adobe Illustrator. A template layer is included to help you set up your artwork, which will not show in print, but you can hide this layer if desired.
